document number: 34045 for tec hnical questions, contact: magnetics@vishay.com www.vishay.com revision: 24-may-11 29 this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 inductors, commercial, molded, shielded, miniature, axial leaded ims-2 vishay dale electrical specifications inductance tolerance: 10 % standard, 5 % available insulation resistance: 1000 m ? minimum per mil-std-202, method 302, test condition b dielectric withstanding voltage: 200 v ac per mil-std-202, method 301 (at sea level) percent coupling: 3 % maximum per mil-prf-15305 operating temperature: - 55 c to + 105 c features ? flame retardant coating ? electromagnetic shield ? small package for a shielded inductor ? epoxy molded construction provides superior moisture protection ? precision perfo rmance, excellent reliability, sturdy construction ? compliant to rohs directive 2002/95/ec mechanical specifications terminal strength: 3 lb pull per mil-std-202, method 211, test condition a, except 180 rotation for a total of 540 weight: ims-2 = 0.30 g maximum test equipment (1) ? h/p 4342a q-meter ? measurements corporation megacycle meter, model 59 ? wheatstone bridge note (1) test procedure per mil-prf-15305 material specifications encapsulant: epoxy standard terminals: #24 awg, tinned copper environmental performance test conditions specifications barometric pressure c mil-std-202, method 105 thermal shock a-1 mil-std-202, method 107 flammability - mil-std-202, method 111 overload - mil-prf-15305 low temperature storage - mil-prf-15305 resistance to soldering heat a mil-std-202, method 210 resistance to solvents - mil-std-202, method 215 dimensions in inches [millimeters] standard electrical specifications model ind. (h) tol. (%) q min. test frequency l and q (mhz) srf min. (mhz) (1) dcr max. ( ? ) rated dc current (ma) (2) ims-2 0.10 10 54 25.0 490.0 0.10 670 iron core ims-2 0.12 10 52 25.0 430.0 0.11 635 ims-2 0.15 10 50 25.0 415.0 0.12 610 ims-2 0.18 10 49 25.0 375.0 0.13 585 ims-2 0.22 10 47 25.0 330.0 0.15 545 ims-2 0.27 10 46 25.0 300.0 0.16 530 ims-2 0.33 10 44 25.0 260.0 0.18 495 ims-2 0.39 10 42 25.0 230.0 0.19 485 ims-2 0.47 10 41 25.0 220.0 0.21 460 ims-2 0.56 10 41 25.0 210.0 0.23 440 ims-2 0.68 10 39 25.0 180.0 0.24 430 ims-2 0.82 10 38 25.0 165.0 0.27 405 ims-2 1.0 10 37 25.0 150.0 0.30 385 notes (1) measured with full length lead (2) rated dc current based on maximum te mperature rise as shown in table 0.250 0.010 [6.35 0.254] 1.50 0.120 [38.10 3.05] 0.095 0.010 [2.41 0.254] 0.020 0.0015 [0.508 0.038]
www.vishay.com for technical questions, contact: magnetics@vishay.com document number: 34045 30 revision: 24-may-11 this document is subject to change without notice. the products described herein and this document ar e subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ims-2 vishay dale inductors, commercial, molded, shielded, miniature, axial leaded ims-2 1.2 10 40 7.9 130.0 0.73 247 iron core ims-2 1.5 10 41 7.9 115.0 0.86 228 ims-2 1.8 10 43 7.9 105.0 0.95 217 ims-2 2.2 10 45 7.9 95.0 1.1 202 ims-2 2.7 10 48 7.9 90.0 1.2 193 ims-2 3.3 10 49 7.9 80.0 1.3 185 ims-2 3.9 10 50 7.9 75.0 1.5 173 ims-2 4.7 10 53 7.9 70.0 2.4 136 ims-2 5.6 10 54 7.9 60.0 2.9 124 ims-2 6.8 10 55 7.9 55.0 3.2 118 ims-2 8.2 10 55 7.9 53.0 3.6 111 ims-2 10.0 10 57 7.9 50.0 4.0 106 ims-2 12.0 10 36 2.5 35.0 3.0 122 ims-2 15.0 10 38 2.5 30.0 3.4 115 ims-2 18.0 10 40 2.5 26.0 3.8 108 ims-2 22.0 10 40 2.5 24.0 4.9 96 ims-2 27.0 10 40 2.5 21.0 5.8 88 ims-2 33.0 10 41 2.5 20.0 6.5 83 ims-2 39.0 10 42 2.5 19.0 7.9 75 ims-2 47.0 10 44 2.5 16.0 9.3 69 ims-2 56.0 10 44 2.5 15.0 11.0 64 ims-2 68.0 10 45 2.5 13.0 12.0 61 ims-2 82.0 10 45 2.5 11.0 13.0 59 ims-2 100.0 10 40 2.5 10.5 16.8 51 ordering information ims-2 10 h 10 % er e2 model inductance value inductance tolerance package code jedec lead (pb)-free standard global part number ims02 er 100 k model package code inductance value inductance tolerance standard electrical specifications model ind. (h) tol. (%) q min. test frequency l and q (mhz) srf min. (mhz) (1) dcr max. ( ? ) rated dc current (ma) (2) notes (1) measured with full length lead (2) rated dc current based on maximum temperature rise as shown in table
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
